When do the vmware vsphere esxi 6.x IOVP cert, the network switch requires the function of trunk mode,big jumbo-frame and native vlan. However HUAWEI switch is different from the Cisco switch, the concept of ‘native vlan’ just for Cisco.
Refers to the other engineer’s experience and online discussion ,the HUAWEI concept of ‘pvid vlan’ equals to the ‘native vlan’ .
Here are the commands which used to configure the HUAWEI switch:
#port group interface 40GE 1/17/0 to interface 40GE 1/17/8
###OR USE#port range interface 40GE 1/17/0 to interface 40GE 1/17/8
#jumboframe enable 9126
#port link-type trunk
#port trunk pvid vlan 2
#port trunk allow-pass vlan 2 to 4094