Iperf3 performance test-network adapter

Connect SUT to client using either back to back or switch connection and configure an IP underthe same subnet. Both platforms should have NICs with same network speed. e.g. both with 10Gb

1. Enable Iperf on clients
iperf3.exe -s
Linux procedure:

2. Run Iperf on SUT
Windows procedure:
iperf3.exe -c <ip_client> -w 640k -P <X> -t 6000 -V >>iperf_log.txt
*Check values for -P option base on the cores qty.
Linux procedure:
iperf3.exe -c <ip_client> -w 640k -P <X> -t 6000 -V >>iperf_log.txt
*Check values for -P option base on the cores qty.

Iperf will run for 10 minutes
iperf shows under Bandwidth column top speed of the NIC
When iperf finish it says: “iperf done”
3 Get logs.
Check and save all this logs and upload them:
iperf_log.txt
dmesg